Andrew Edwards Posted December 2, 2017 Share Posted December 2, 2017 Hi all. Have 2 of these and one is leaking from the nozzle. It is like it is drawing the fluid through. There is no liquid anywhere inside the unit. Even without power it slowly draws fluid through itself about a drip every 2 seconds. If I run the unit, it stops dripping for a short while but then starts again. Any ideas? Cheers, Link to comment Share on other sites More sharing options...
bigclive Posted December 2, 2017 Share Posted December 2, 2017 If it's pump based the pump itself has a small spring loaded rubber ball that is supposed to prevent unwanted flow. It sounds like it's gunked up or the spring may have corroded. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.