agermich Posted September 13, 2017 Share Posted September 13, 2017 Hi All Looking for a little advice on recalling scenes on an Allen and Heath QU16 via Midi from Qlab4. QLab Recognises the QU16 as a midi device, so thats a good start. I have the "QU midi protocol" PDF, but can't get them talking. After a bit of googling, what I can gather is that the QU commands are NRPN, but Qlab only sends SysEx, MSC or Midi notes. It looks as though there are people out there who have made it work, but I'm not sure how. Any advice would be appreciated, not looking to do anything too complicated, just change between scenes. Cheers Mike Think that I have solved it! Link to comment Share on other sites More sharing options...
MarkPAman Posted September 14, 2017 Share Posted September 14, 2017 Think that I have solved it! If so, please share. It's something I may need to do soon. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.