stephengreatorex Posted April 26, 2005 Share Posted April 26, 2005 Does anyone know the wiring outputs for a Strand permux 24 unit.I really need to know the connections from the 25pin D plug to 8 pin din connectors. there is a picture of the unit here.D54 UnitAny information greatly received. Steve Link to comment Share on other sites More sharing options...
richard_cooper Posted April 26, 2005 Share Posted April 26, 2005 Does anyone know the wiring outputs for a Strand permux 24 unit. I really need to know the connections from the 25pin D plug to 8 pin din connectors. there is a picture of the unit here. D54 Unit Any information greatly received. Steve <{POST_SNAPBACK}> I've just dug out the manual for one, what I read from the schematic is that there are four output plugs PL4-PL7. PL6 carries channels 1-6, PL6 7-12, PL5 13-18, and PL4 19-24. On each plug Pin 1 = 1st Chan, through to pin 6 6th Chan, Pin 7 is unused and Pin 8 is 0V. Hope this helps. Richard Link to comment Share on other sites More sharing options...
stephengreatorex Posted April 26, 2005 Author Share Posted April 26, 2005 Thanks for that, but the model I've got only has 1 25 Pin D plug for 24 channels. So I presume one of these is 0v and the other 24 are -10v for the channels. HAving wired up these plugs before on differet units I know that they don't always follow 1 - 1 wiring.If you've got the info on that I'd be most grateful Steve Link to comment Share on other sites More sharing options...
gareth Posted April 26, 2005 Share Posted April 26, 2005 It's been a long while since I've come into contact with a 25-pin D-sub analogue output! But IIRC, it's channels 1 to 24 on pins 1 to 24, with 0v on pin 25. Link to comment Share on other sites More sharing options...
oakwarden Posted April 27, 2005 Share Posted April 27, 2005 This is a useful reference, the only 25 pin listed isn't stand, but is similar to the information given in previous posts Connector Pin Outs Simon :P Link to comment Share on other sites More sharing options...
Spuddy Posted April 27, 2005 Share Posted April 27, 2005 Be warned when wiring from a 25 Pin D-Sub it goes 1-13 across the top row THEN Below 1 is 14 etc finishing with 25 UNDER 13. Hope this makes sense IE Male D Sub 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Female D Sub 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.