Barreller Posted April 25, 2015 Share Posted April 25, 2015 I have a S4.5 handheld with a problem. Turn it on and it works fine. Turn it off and then on again and there is no output (or none that the receiver can see). Wait a few minutes turn it on again and repeat the above. Any body got any ideas? Frequency indication is correct and doesn't change when it isn't working. Link to comment Share on other sites More sharing options...
laolu Posted April 26, 2015 Share Posted April 26, 2015 Squelch set too high? Link to comment Share on other sites More sharing options...
sandall Posted April 27, 2015 Share Posted April 27, 2015 You could try giving Trantec a call. John (I've forgotten his surname) in Service is/was their technical guru. If that fails, Mike Lowe of MLEC (based in Stafford) is Trantec's official repair man for older mics. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.