topsy100 Posted March 6, 2015 Share Posted March 6, 2015 Hi all I have a high end studio spot that was working fine but needed a clean. After putting it back together I get a CLR1 error then the screen says INIT then goes to SHUT DOWN any ideas please Thanks Link to comment Share on other sites More sharing options...
jbrown96 Posted March 7, 2015 Share Posted March 7, 2015 Hi Have never used this fixture before, but looking at this problem it I would say that during your cleaning of the fixture dirt has gotten into the position sensor for colour wheel 1 (based on CLR1 code) and is causing your problem. Cleaning the sensor will usually sort this sort of problem. Here is a link to the High End Systems forum that appears to be related to your problem and might help with troubleshooting the problem. https://forums.highe...spot-error-code Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.