clapagelighting Posted February 25, 2014 Share Posted February 25, 2014 Does anyone know if you can use the Enttec DMX/Artnet dongles with the ETC Cobalt Nomad software or if you have to purchase the ETC Gadget interface? Thanks, Link to comment Share on other sites More sharing options...
Tomo Posted February 26, 2014 Share Posted February 26, 2014 If you mean the EntTec "ODE" or equivalent, then yes, that should work (though I haven't tried it). Cobalt Nomad outputs Art-Net and E1.31 Streaming ACN as DMX-over-Ethernet, E1.17 ACN for RDM-other-Ethernet, and supports the use of an ETC Gadget for one universe of local 'hard-line' DMX and RDM. You can use Cobalt Nomad with anything that can listen to these DMX-over-Ethernet protocols as a direct control input and/or to create 'hard-line' DMX. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.