Penfold Posted January 7, 2014 Share Posted January 7, 2014 Hi All, I'm fairly new to digital mixers so please excuse this if it's really obvious! I'm using an 01V96VCM for our local am-dram panto and can't seem to shift the flashing message at the top of the screen - 15 [ No Data ] . I've done a factory restore on it (it was saying 08 [ No Data ]. Other than that so far so good. It is fitted with an MY16AT card and will be connected via fibre optic to a Brikworm - a system we've used before with great success. I've looked through the manual and can't find anything on this. Thanks in advance for any help / advice. Penfold Link to comment Share on other sites More sharing options...
mr_towers Posted January 7, 2014 Share Posted January 7, 2014 That's the scene details you're seeing at the top of the screen (IIRC), so is nothing to worry about. If you had something recorded in it it would stop flashing and give you the scene's number and whatever you've called it. E2A - The scene will flash until you press recall - once you recall a stored scene the scene data will stabilise :) Link to comment Share on other sites More sharing options...
Penfold Posted January 7, 2014 Author Share Posted January 7, 2014 Thanks for the quick reply mr.towers! Glad it's nothing to worry about as other than that everything seems to work great. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.