mr techie Posted January 3, 2014 Share Posted January 3, 2014 does anyone know or have experience if/of a sharpy will hang inside a james thomas GP52cm box truss and calibrate without problems ? Link to comment Share on other sites More sharing options...
jonathanhill Posted January 3, 2014 Share Posted January 3, 2014 does anyone know or have experience if/of a sharpy will hang inside a james thomas GP52cm box truss and calibrate without problems ? No, it will not fit. The Sharpy is 475mm long from base to lens WITHOUT clamps. Link to comment Share on other sites More sharing options...
top-cat Posted January 3, 2014 Share Posted January 3, 2014 I did it on a festival, we had to run a scaff bar along the length of the truss, OUTSIDE the truss, on the top, in the middle, with half couplers holding it on at the ends and on the larger diameter top braces. We then mounted the sharpies to that bar and they sat nicely in the truss. Top tip from hindsight... we put the sharpies in through the "bottom" with the truss sat on it's side.. it might be easier to mark the bar, hang them on the bar, drop the bar in and then do the couplers up. Link to comment Share on other sites More sharing options...
gnomatron Posted January 7, 2014 Share Posted January 7, 2014 trying to reinvent pre-rig truss? :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.