Jump to content

martin minimac lamp


Recommended Posts



Check voltages going to the starter in the head, its the green rectangular block.


You should be getting mains voltage on the outside two pins, the black and blue wire.... if you get mains voltage then the starter wants replacing. Also check the thermal in the head is closed circuit.


Dont put you multimeter on the inside pin or you will blow it up.


If you not getting mains voltage at the stater check the ballast out put and the wireset between the base and head for breakages.

Link to comment
Share on other sites

  • 3 months later...


This topic is now archived and is closed to further replies.

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.