stuart.t Posted October 5, 2012 Share Posted October 5, 2012 I have a Robe Scan 575 XT and its doing a strange thing. One of the gobo wheels is vibrating so the image is blured when projected on a wall. It turns ok and selects the gobos but wont settle and produce a crisp image. When you apply pressure to the gobo wheel the vibrating will stop then will suddenly come back again. When you try and turn the gobo wheel by hand you can feel the vibration on the feedback. I have tested the wires and they are ok, tried a new motor and changed a driver chip and it is no better. Robo technical help havnt seen this before either. Any one seen this or have any answers as I am lost with it now ? Link to comment Share on other sites More sharing options...
medina Posted October 7, 2012 Share Posted October 7, 2012 Is the fan ok, vibrating could be coming from another area of the scanner? Is the gobo wheel on tight? Maybe a good tighten up though out the gubbins might resolve it. Good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.