michael Posted September 28, 2012 Share Posted September 28, 2012 Hi Guys, I have been asked by a friend to take a look at his dj laser that keeps blowing the main fuse.The laser is only a cheap unbranded one.I doubt this is something I can fix but wondered if there is anything that I should check internally that might solve the problem? Thanks, Michael :) Link to comment Share on other sites More sharing options...
Robin D Posted September 28, 2012 Share Posted September 28, 2012 Could you narrow down for us exactly what you mean by the 'main fuse' Michael?The main fuse that is on the main incomer into the building?The only fuse in the mains plug?The main fuse on the internal PCB?Or.... something else? Without that information, I think we are all just guessing. Link to comment Share on other sites More sharing options...
michael Posted September 28, 2012 Author Share Posted September 28, 2012 Sorry was in a bit of a rush! Power in on the unit is via IEC and there is a fuse below the IEC rated at 5 amps, this is the fuse that keeps blowing. Link to comment Share on other sites More sharing options...
Ashley R Posted September 29, 2012 Share Posted September 29, 2012 My guess would be the cheap power supply inside has carked it, and is shorting out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.