retsain Posted March 17, 2012 Share Posted March 17, 2012 clipping led light always glow" but the amplifier have an ok output" Link to comment Share on other sites More sharing options...
mkfs9 Posted March 18, 2012 Share Posted March 18, 2012 Quite a vauge question. If you are clipping the amp, somthing is causing it. check each channel with pfl could just be the bass drum for example. Link to comment Share on other sites More sharing options...
Dave C Posted March 18, 2012 Share Posted March 18, 2012 clipping led light always glow" but the amplifier have an ok output" If the clip light is always on, even with no input signal then there is a problem. Read the manual first, to see what kind of error mode this might be, and then contact the manufacturer technical support. Lab Gruppen have been very helpful when I had a rainwater episode with one of their power amps. I managed to get it working perfectly, with their advice on how to repair. Good luck with your amp repair! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.