techie_101 Posted March 1, 2012 Share Posted March 1, 2012 Hi everyone. Does anyone know how to move cues with in a cue stack on a GrandMA 2? E.g move cue 3 to cue 2 so cue 2 becomes cue 3 etc........ Thanks guys Link to comment Share on other sites More sharing options...
moosetek_ca Posted March 1, 2012 Share Posted March 1, 2012 How I normally do it is as follows Press SELECT and then hit the button above the fader (or the executer button) that the stack is recorded on (this step merely reduces the amount you have to type, allowing you to skip the SEQ 43 or whatever that would otherwise be needed) Then, if say, you wanted cue 2 to come before cue 3 (and assuming the cues are numbered 1,2,3 etc) MOVE CUE 3 AT CUE 1.9 PLEASE (can be shortened to MOVE CUE 3 AT 1.9 if desired) You can then right click any of the cue numbers in the cue window and renumber the cues again if required to get them back in a cue 1,2,3 order If you wish to skip the SELECT step above then the full syntax is MOVE SEQUENCE 1 CUE 3 AT SEQUENCE 1 CUE 1.9 PLEASE Hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.