medina Posted February 10, 2012 Share Posted February 10, 2012 Hi,I have just bought some LED bars from stairville. I have used the patch wizard on the congo Jr but it only seems to run the bar in single segment mode. does anybody have a profile ready made to run them in 3 segment (11DMX Ch) mode? I have checked in the profile editor and re jigged it for 3 segment but with no success.thanks Link to comment Share on other sites More sharing options...
smalljoshua Posted February 10, 2012 Share Posted February 10, 2012 You have to have the First DMX Chan set to about 80 IIRC. Josh Link to comment Share on other sites More sharing options...
medina Posted February 12, 2012 Author Share Posted February 12, 2012 Thanks Josh,I can see how the congo allows me to select 3 segment mode, however the colour pallet doesnt give me the option to change the colours for each segment. I have looked at the template setup and only 5 of the required 11 DMX settings are activated. I have inserted the required DMX and assigned them red green and blue with no joy. Is there something I am missing? Link to comment Share on other sites More sharing options...
Richard CSL Posted February 12, 2012 Share Posted February 12, 2012 yes as Josh says unless the first control channel is set to 60 there will be no light output from the rest of the bar as this is the shutter setting for the whole of the fixture. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.