peter Posted May 20, 2003 Share Posted May 20, 2003 Is there a way to control a Jem TechnoFog by DMX? I'm sure I've seen a DMX remote for it somewhere, but I can't for the life of me remember where it was and how much it costs... any ideas? Link to comment Share on other sites More sharing options...
richard Posted May 20, 2003 Share Posted May 20, 2003 You can do one of two things: 1) Buy a DMX convertor for it (from most places - SLX, AC etc) 2) wire up a cable from a Demux, the technofog control is just a 0>10v signal, with the third pin providing the +10v supply for the remote. Therefore if you wire it up correctly you can just wire an XLR into an 8 pin din, and away you go, be aware though that in order for the machine to warm up the channel must be above a certain level, otherwise the machine just switches off. Richard Link to comment Share on other sites More sharing options...
peter Posted May 20, 2003 Author Share Posted May 20, 2003 Are we talking TechnoFog or TechnoHaze here Richard? TechnoFog runs on 5 pin DIN for control, and (according to the Martin website) you need 16v control on one of the lines Link to comment Share on other sites More sharing options...
richard Posted May 20, 2003 Share Posted May 20, 2003 OOps, you are quite correct, I should learn to read the thing first. I expect that if a convertor exists SLX will sell it though Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.