DanSteely Posted January 30, 2012 Share Posted January 30, 2012 Hi I’m using an LS9 for a drama show and am using fills anddelays fed via matrix feeds. Is it possible to modify the mix sent to thematrix outputs (i.e. more vocals and less KB’s). Or should I do this via a post fader aux feed?. Just also to mention I’mproviding 10 separate headphone mixes to the pit plus 6 matrix outputs. Is there a simple sends on fader type way of doing this? Many thanks.. Dan Link to comment Share on other sites More sharing options...
Shez Posted January 30, 2012 Share Posted January 30, 2012 When you're in the master layer, press the mix button corresponding to the matrix you want to access twice, same as you would to get sends on faders for a mix bus. Link to comment Share on other sites More sharing options...
DanSteely Posted January 30, 2012 Author Share Posted January 30, 2012 Many thanks for your reply. Simple.when you know how.. Link to comment Share on other sites More sharing options...
TimmyP1955 Posted February 27, 2012 Share Posted February 27, 2012 Typically you will use a few buses as groups (vocals, drums, electric guitars, keys, whatever) which you can then dial into each matrix as needed. With 10 mono mixes to the stage, you have 6 buses left for groups and FX sends. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.