Andrew Edwards Posted September 15, 2011 Share Posted September 15, 2011 One of my ART 800AS's immediately blows the internal fuse when you switch it on. Any thoughts from you guys before I start throwing any money at it? Thanks, Andrew. Link to comment Share on other sites More sharing options...
Doug Siddons Posted September 15, 2011 Share Posted September 15, 2011 Assuming you've replaced the fuse like for like, and a visual inspectionn doesn't reveal something obvious, unfortunately its off to the repair centre with it. Link to comment Share on other sites More sharing options...
adam2 Posted September 16, 2011 Share Posted September 16, 2011 Do make very certain that the new fuses are the right ones !This may seem elementary, but I have known anti surge fuses to be replaced by standard ones. A standard fuse will often fail instantly if used in place of an antisurge or delay type. Link to comment Share on other sites More sharing options...
pily Posted June 8, 2012 Share Posted June 8, 2012 Hi, I had same problem with art 800as ! Problem was very simple :) Take the fuse out and squeeze fuse terminals closer so there cane emerge smark !!! Best Regards from Estonia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.