fincaman Posted August 2, 2011 Share Posted August 2, 2011 Is anyone familiar with DMX Control ? I need to know the exact method of programming a simple scene no one answers on their own forum. I have eight par cans I set the first scene to "all off" so far so good but when I create the next scene "all on" the first scene takes on the same settings, if I go to the first scene again and change it back the second scene takes on the same settings. I hope you understand what I am trying to explain. Regards Kevin Link to comment Share on other sites More sharing options...
MarkPAman Posted August 2, 2011 Share Posted August 2, 2011 Do you mean you are using this software? Link to comment Share on other sites More sharing options...
timmeh2 Posted August 2, 2011 Share Posted August 2, 2011 Is anyone familiar with DMX Control ? Have you got the manual? Use the link Mark gave you. Link to comment Share on other sites More sharing options...
fincaman Posted August 2, 2011 Author Share Posted August 2, 2011 Yes I am using that software and I have the manual but it only gives vague instructions I have just spent two hours trying to create two scenes "all on "all off" and failed. Regards Kevin Link to comment Share on other sites More sharing options...
Dave Kay Posted August 2, 2011 Share Posted August 2, 2011 Make sure you are selecting Simple Scene not scene from library when creating the new scene. Link to comment Share on other sites More sharing options...
fincaman Posted August 2, 2011 Author Share Posted August 2, 2011 I think I have done it you need to tick "disable HTP" or it does crazy things Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.