Jump to content

EV ZX5 vs ZXA5


warrenstuart

Recommended Posts

Hi

 

As the topic says really, has anybody tried or preferably used both EV ZX5s and ZXA5s and is there much difference?

 

I'm currently using ZX4s but have used ZX5s too (there's very little difference between the 4 & 5 running side by side) but wondered if there's much to be gained by going to the ZXA5 other than loosing the amp and making a hole in the bank balance!

 

Thanks.

Link to comment
Share on other sites

I agree if you can keep it passive, what are you using them for though?

 

out of all that range I like the ZX1 and ZX3, The ZX3 has the same 12" driver used in the XLC line array. Its a great box for the money.

 

Sam

Link to comment
Share on other sites

Hi Sam

 

Using them for a small mobile disco, no more than approx 120 people 9 times out of 10 and they seem to work fine, bit of a hole in the frequency response at 2.3khz (see engineering data sheet from EV website) but my graphic EQ very easily fixes that and they are very clear sounding.

You commented on the ZX1, I was told a couple of times to try the ZX1 & SB122 combination if I wanted to keep things lightweight???

 

Warren.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.