sam.henderson Posted October 20, 2004 Share Posted October 20, 2004 Hi guys, Anyone know of any gobo that closly represents a onion (Cross section and outside??). Know its a bit of a wierd one Thanks, Sam Link to comment Share on other sites More sharing options...
sam.henderson Posted October 20, 2004 Author Share Posted October 20, 2004 just a found a picture of a cross section os a onion (Dont worry about colouring!) http://www.leuschke.org/log/images/onion.jpg Ta, Sam Link to comment Share on other sites More sharing options...
tjkerr Posted October 20, 2004 Share Posted October 20, 2004 Where is it to be used,size and what do you want to project on to ? and how long does it have to last? eg.install,touror weeks run. Link to comment Share on other sites More sharing options...
sam.henderson Posted October 20, 2004 Author Share Posted October 20, 2004 out of a source four onto a gauze used for a weeks run Sam Link to comment Share on other sites More sharing options...
kalmatthew Posted October 20, 2004 Share Posted October 20, 2004 Is the source 4 hired or stock, surely if you could it would be easiest to get a pacific and acetate. Or if not, maybe a custom cut gobo. Link to comment Share on other sites More sharing options...
sam.henderson Posted October 20, 2004 Author Share Posted October 20, 2004 source four is stock and there is currently no room in the lx budget to hire in more profiles (we would need an extra 8)- its a very small venue so it should be alright. Sam Link to comment Share on other sites More sharing options...
Lee Brennan Posted October 20, 2004 Share Posted October 20, 2004 Could you not use ROSCO Imagepro? Don't know cost to hire both software and product, but it was just a thought. Cheers Lee Link to comment Share on other sites More sharing options...
tjkerr Posted October 20, 2004 Share Posted October 20, 2004 well sam I dont know how you will get a gobo or profile with no money (unless you cut it your self, a selcon is about £12 tops per week dont know how much the dha gobo cooler is a week wouldnt think more than £20 and you print your own gobo. Link to comment Share on other sites More sharing options...
peter Posted October 20, 2004 Share Posted October 20, 2004 Rosco Imagepro is about £30/wk from SLX, with the kit to make up a slide coming to about £25, or £18 if you buy a pack of 10 (£180). Link to comment Share on other sites More sharing options...
oh lordy Posted October 21, 2004 Share Posted October 21, 2004 probably get a gobo cut for that to fit in your profile Link to comment Share on other sites More sharing options...
sam.henderson Posted October 21, 2004 Author Share Posted October 21, 2004 well sam I dont know how you will get a gobo or profile with no money (unless you cut it your self, a selcon is about £12 tops per week dont know how much the dha gobo cooler is a week wouldnt think more than £20 and you print your own gobo. I have got the budget to get the gobos and ahve already got the profiles (read above!) but dont have the budget to hire in a stack of profiles. I am looking into the ImagePRO- Thanks Sam Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.