jbenghiat Posted July 20, 2010 Share Posted July 20, 2010 I'm pleased to announce the release of my latest Vectorworks plug-in, the Source Four Savvy Section. I found I was spending too much time adding Source Four and Source For PAR symbols to my 2D sections. I was always editing, ungrouping, rotating, and flipping, swapping C-clamps for tees, changing barrel types, drawing top hats, etc. Either that, or I would just settle for the slightly off version I had. My solution — the Source Four Savvy Section. A single plug-in object with all of the following options: Set any yoke angle, tilt angle, and flip.Switch between front or side views.Symbols have attributes set by class, with three levels of detail., so they always look the way you want them.Show C-clamp or tee, with or without a standard 1.5” pipe.Show short yoked.Switch between Standard, 90-deg, 70-deg, 14-deg, 10-deg, and 5-deg barrel types.Add a top hat, half hat, color extender, or scroller of any standard size.Dimensionally accurate fixtures, components, and accessories based on manufacturer drawings The Source Four Savvy Section works with Vectorworks 12 through 2010. To learn more, visit http://www.benghiatlighting.com/software/s...r-savvy-section. To see a short video of the Savvy Section in action, visit http://www.youtube.com/watch_popup?v=EOHFw...Rc&vq=hd720. Regards,Josh Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.