martinkings Posted November 20, 2009 Share Posted November 20, 2009 My smoke machine was making a lot of noise so I cleaned it by pouring out all the fliud, putting de-ionised water in it and feeding it through for a while. Once I'd put the fluid back in, the output is now ridiculously low (although it's much quieter). I'm wondering if the pump has gone, but would be surprised, as I'm still getting some output. Perhaps there's just a blockage somewhere Any suggestions? Link to comment Share on other sites More sharing options...
Wingwalker Posted November 20, 2009 Share Posted November 20, 2009 Which machine is it? Have you tried cleaning the nozzle with a mouse tail file? If you havn't got one of those then a straightened out paperclip usually works just as good. Prior to cleaning it with the de-ionised water, did you use a different manufacturers fluid in it??? David. Link to comment Share on other sites More sharing options...
sleah Posted November 20, 2009 Share Posted November 20, 2009 Have you run it for ages since putting the normal fluid back in? I'm talking half an hour maybe.I had a similar thing and it took ages to re-prime the system! Simon Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.