nico_ah Posted November 13, 2008 Share Posted November 13, 2008 Hello, I am a new user of Showtech Sunstrip active battens. I wonder what is the best way to control this fixture, with say a Hog or GrandMA. I mean should I use pixel mapper for instance, or just anything else I may not know yet ? Thanks for help, Nicolas Link to comment Share on other sites More sharing options...
LXbydesign Posted November 13, 2008 Share Posted November 13, 2008 I guess it also depends what DMX mode you will be running it in. Can you be a bit more specific as to its application. Otherwise simple answer is: you can control them with any DMX desk- from a fat frog to a Hog 3!!!. If there isnt one already, you could write a fixture personality for it which might speed up programming a bit. Link to comment Share on other sites More sharing options...
tom_the_LD Posted November 13, 2008 Share Posted November 13, 2008 I used these last week for a show - granted I only had two. I just used them in the 10 channel DMX mode from an Express. Depends how many you want to use and what you want to do with them really! Link to comment Share on other sites More sharing options...
LXbydesign Posted November 13, 2008 Share Posted November 13, 2008 I think ther're great!! Nice bits of kit and so versatile!! Fantastic for light curtains. I just wish they would make a scroller for them Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.