Deathride Posted March 21, 2004 Share Posted March 21, 2004 hey there I was just wondering how u get the roboscan to blackout on movement of ether gobo or colour ??? Link to comment Share on other sites More sharing options...
peter Posted March 21, 2004 Share Posted March 21, 2004 If its a Pro 918 you're talking about, you'll need to take the Effect Speed channel to 252 or above. You can download the manuals from Martin Link to comment Share on other sites More sharing options...
Deathride Posted March 21, 2004 Author Share Posted March 21, 2004 there all 218 's ... would it work the same way ?!?! Link to comment Share on other sites More sharing options...
Djbarryblue Posted March 21, 2004 Share Posted March 21, 2004 ah here we go try this channel numbers for the martin 218here Link to comment Share on other sites More sharing options...
Deathride Posted March 21, 2004 Author Share Posted March 21, 2004 ok ?!?!? so how would I get it to black out on movement of the gobo ???? we have 4 martin pro 218's and use the fat frog to opperate them Link to comment Share on other sites More sharing options...
Stu Posted March 21, 2004 Share Posted March 21, 2004 Mr Deathride, Have a lookie at the 218 manual at http://www.martin.com/service/downloadfile...EN_B.PDF&cat=65 - I presume these are the Mk2 versions? If so, when in DMX Mode 2, take Channel 8 to between 252-255. HTH Stu Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.