whitehousejamie Posted August 28, 2007 Share Posted August 28, 2007 Hi All, I have a modular staging system, but looking for drapes for it. The two companies that manufacture the systems do not offer drapes for it. Here is a photo of a deck... http://www.pauljamespromotions.fsnet.co.uk...stagingdeck.jpg As you can see, not a case of velcro drapes, needs to have some sort of plastic component to fit inside the groove. Any ideas of any companies that can provide these? Thanks in advance. Link to comment Share on other sites More sharing options...
Pete McCrea Posted August 28, 2007 Share Posted August 28, 2007 I've seen that sort of staging draped with Velcro drapes. The velcro was attached to the top section of the extrusion only though... Link to comment Share on other sites More sharing options...
whitehousejamie Posted August 28, 2007 Author Share Posted August 28, 2007 Thanks for that. I have experimented a little with velcro, but it didn't stick very well to the metal. Link to comment Share on other sites More sharing options...
Pete McCrea Posted August 28, 2007 Share Posted August 28, 2007 it was pretty agressive adhesive backed stuff that had been used. Might be worth cleaning the Ali with some Isopropyl Alcohol to help it stick. Link to comment Share on other sites More sharing options...
Paul_R Posted August 28, 2007 Share Posted August 28, 2007 IF you can slide something into the channel from the end, make up some wooden batterns with the velco stuck to those and additionally fasten with a staple gun. Or is that the problem, you cannot get into the channels? Regards,Paul Link to comment Share on other sites More sharing options...
whitehousejamie Posted August 28, 2007 Author Share Posted August 28, 2007 Cannot get into them :( Link to comment Share on other sites More sharing options...
AndyJones Posted August 29, 2007 Share Posted August 29, 2007 Hows this: Stage drapes HTH AndyJones Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.