Cookie Posted July 9, 2007 Share Posted July 9, 2007 Hi does anyone know where I can get powersoft amps repaired,not getting any output when switched on? Link to comment Share on other sites More sharing options...
Rob_Beech Posted July 9, 2007 Share Posted July 9, 2007 Make sure there is enough current available on the circuit to power it up. If I'm forced to run my rack off a 13A circuit and I power up the smaller ones (5000's etc) first and the 7000 last it wont switch on. Failing that, room is pretty tight in there, a good clean can work wonders. Link to comment Share on other sites More sharing options...
Cookie Posted July 9, 2007 Author Share Posted July 9, 2007 also the fan will not come on straight away,takes a few mins to come on,ive had look inside looks clean,as I always clean my amps out,maybe a dryjoint some where on the board,thanks Link to comment Share on other sites More sharing options...
Rob_Beech Posted July 10, 2007 Share Posted July 10, 2007 Not entirely sure of what model this is? Link to comment Share on other sites More sharing options...
Cookie Posted July 11, 2007 Author Share Posted July 11, 2007 Not entirely sure of what model this is? Hi Rob,its a digam 1502, 750w per ch @ 2ohms Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.