Chris Beesley Posted July 5, 2007 Share Posted July 5, 2007 Hi Folks, I suppose its time I posted a "help" thread.... Does anybody know the pinout for the Audio Technica ATW-T27 beltpacks? I have been tasked with fixing a system to repair from my dads works (OK, I know... I should sell him a new set! but budgets are tight). Cheers! Link to comment Share on other sites More sharing options...
soundo26 Posted July 5, 2007 Share Posted July 5, 2007 further to that, does anybody know where to buy HiRose plugs for a half decent price, the only source I know charge £35 each, I'm looking for six which tends to be a bit expensive!! Link to comment Share on other sites More sharing options...
studiofile Posted July 6, 2007 Share Posted July 6, 2007 Hi Folks, I suppose its time I posted a "help" thread.... Does anybody know the pinout for the Audio Technica ATW-T27 beltpacks? I have been tasked with fixing a system to repair from my dads works (OK, I know... I should sell him a new set! but budgets are tight). Cheers! Here you go...1 RF out/ground2 guit - hi z input3 mic audio in4 bias volts its a Hiros hs10a female cable connector You can defintely get them from Canford Audio and I am pretty sure CPC do them as well. Mike. Link to comment Share on other sites More sharing options...
Chris Beesley Posted July 6, 2007 Author Share Posted July 6, 2007 Excellent ... cheers! (I did scour the AT website but couldnt find the pinouts) We do stock the connector under CN05895 (out of stock at the moment - more due in). Link to comment Share on other sites More sharing options...
Dave Posted July 6, 2007 Share Posted July 6, 2007 further to that, does anybody know where to buy HiRose plugs for a half decent price, the only source I know charge £35 each, I'm looking for six which tends to be a bit expensive!! Which particular connector are you after? The sort for Audio-Technica beltpacks? Link to comment Share on other sites More sharing options...
soundo26 Posted August 2, 2007 Share Posted August 2, 2007 further to that, does anybody know where to buy HiRose plugs for a half decent price, the only source I know charge £35 each, I'm looking for six which tends to be a bit expensive!! Which particular connector are you after? The sort for Audio-Technica beltpacks? It's the four pole connector for the Sony uwp series beltpacks which have AT899 mics on them! Link to comment Share on other sites More sharing options...
Chris Beesley Posted December 14, 2011 Author Share Posted December 14, 2011 Just a quick update - CN05895 is now replaced by CN04885. Link to comment Share on other sites More sharing options...
graemeftv Posted December 15, 2011 Share Posted December 15, 2011 you have to be aware that some 2 wire microphone capsules dont like operating with vhf audio technica beltpacks as the rf from the tx gets sent up the screen/ gnd cable of the mic. some mics cant cope with this. These transmitter packs dont have a separate antenna Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.