sounddude Posted June 22, 2007 Share Posted June 22, 2007 is this right my school is thinking of this and I was not sure if it is correct so I thought I would ask the good people of blue room. thanks http://i196.photobucket.com/albums/aa160/alexsp_2007/LightingRig.jpg# alex Link to comment Share on other sites More sharing options...
zonino Posted June 22, 2007 Share Posted June 22, 2007 that should be fine :) Link to comment Share on other sites More sharing options...
JimWebber Posted June 22, 2007 Share Posted June 22, 2007 The only thing you are missing is a terminator on the scanner. It is quite easy to make one, just solder a 120 Ohm resistor across pins 2 + 3 of a spare XLR... Jim Link to comment Share on other sites More sharing options...
Andrew C Posted June 22, 2007 Share Posted June 22, 2007 Add a terminator in the last scan and the jobs a good 'un. Ho - Hum. Must type faster. Link to comment Share on other sites More sharing options...
Oovis Posted June 22, 2007 Share Posted June 22, 2007 Erm, I don't understand. Help. Has the OP edited the OP, or am I missing chunks of this thread? Link to comment Share on other sites More sharing options...
woody74 Posted June 22, 2007 Share Posted June 22, 2007 Erm, I don't understand. Help. Has the OP edited the OP, or am I missing chunks of this thread? There's an image below his comments. -w Link to comment Share on other sites More sharing options...
Oovis Posted June 22, 2007 Share Posted June 22, 2007 Must be something odd here, then. All I can see is a # Link to comment Share on other sites More sharing options...
sounddude Posted June 22, 2007 Author Share Posted June 22, 2007 Thanks Everyone thought it should be ok Link to comment Share on other sites More sharing options...
tom_the_LD Posted June 22, 2007 Share Posted June 22, 2007 Yep Looks fine. Not that it makes any difference, but if I was doing it I would be tempted to go into the dimmer addressed 1-6 first. This is because I like everything in a ascending numerical order (DMX addresses):) Link to comment Share on other sites More sharing options...
TomLyall Posted June 22, 2007 Share Posted June 22, 2007 Yep Looks fine. Not that it makes any difference, but if I was doing it I would be tempted to go into the dimmer addressed 1-6 first. This is because I like everything in a ascending numerical order (DMX addresses) :) Sure, it's nice to do in a way, but utterly utterly pointless. Address in a way that makes sense to you and the lighting desk. Cable in a way that makes sense to the physical location of stuff. Link to comment Share on other sites More sharing options...
iamchristuffin Posted June 23, 2007 Share Posted June 23, 2007 Must be something odd here, then. All I can see is a # Ditto Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.