voodooman Posted March 26, 2007 Share Posted March 26, 2007 I can't for the life of me remember how to write macros for the shift bump buttons. i.e. if macros 301 is fired from the subs bump button 1, what macro number would be the [shift] bump 1 be? Link to comment Share on other sites More sharing options...
gareth Posted March 26, 2007 Share Posted March 26, 2007 Macro 101 is fired by sub 1's bump button. Macro 301 for shift-bump on the same sub. (You may well have already done so, but don't forget to set bump mode to MAC for all bump buttons that you want to use this way.) Link to comment Share on other sites More sharing options...
eamon Posted March 26, 2007 Share Posted March 26, 2007 morning should be in bed now. The macro number for the BUMP buttons is 101-124. The macro number for the SHIFT-BUMP buttons is 301-324 hope that helps eamon Darn Gareth pips me at the post. maybe we should both be in bed!! Link to comment Share on other sites More sharing options...
gareth Posted March 26, 2007 Share Posted March 26, 2007 The macro number for the BUMP buttons is 101-124.Or 101-130 for a 530. Or 101-154 for a 550. Or even 101-296 for a 300-series with the maximum number of submaster panels fitted! B-) Link to comment Share on other sites More sharing options...
voodooman Posted March 28, 2007 Author Share Posted March 28, 2007 Ta very muchly. I thought that was the case, but last time I tried it it didn't eork, so I assumed I was wrong. then the manual is as helpfull as a chocolate teapot. but the desk in question was a rather battered old 550 with half the buttons broken, that may have had something to do with it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.