Johnno Posted February 9, 2007 Share Posted February 9, 2007 In 200mm/300mm stand off brackets where is the 200/300mm measured between? I ask because I need to match one I've got and can't decide because our stock record and order sheet shows it having been ordered as a 300mm type but measurement of the bracket itself shows exactly 200mm from the wall to the innermost surface of the clamped pipe. 300mm occurs about 4cm beyond the outermost surface. This suggests a wrong part was delivered but it doesn't matter provided I order the same again. Link to comment Share on other sites More sharing options...
Richard Bunting Posted February 9, 2007 Share Posted February 9, 2007 Johnno, I guess you're talking about Doughty T33300? If so call 01425 478961 and ask to speak to either Stephen or Lawrence, who will be able to pull up the engineering drawing and tell you exactly. HTH Richard Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.