cknapper Posted September 17, 2006 Share Posted September 17, 2006 How do all, Im having a problem loading presets and sequences onto the Master Playback GO button. Anyone know an easyway to do this. Carlos Link to comment Share on other sites More sharing options...
Tomo Posted September 17, 2006 Share Posted September 17, 2006 Stick the relevant sequence onto the Master you want by typing [number], then holding SEQ and tapping the relevant Master Select key (grey buttons). - Skip this if it's already there. Then hold CONNECT and tap the relevant Master select key. The Master Playback controls will then be connected to the chosen Master, and the first step will run (if a normal sequence), or the chase will start (if a chase) Link to comment Share on other sites More sharing options...
cknapper Posted September 17, 2006 Author Share Posted September 17, 2006 Cool thank you wasnt putting it in a fader !!!!!! Cheers Carl Link to comment Share on other sites More sharing options...
Tomo Posted September 17, 2006 Share Posted September 17, 2006 You're welcome! You can also use the Master Select key as a GO button, without the need to connect it to the Master Playback. Obviously that way you lose the ability to pause and step forwards/backwards, and you have to hit a smaller button. Link to comment Share on other sites More sharing options...
cknapper Posted September 17, 2006 Author Share Posted September 17, 2006 I knew you could stack cues up but as you say on a quick GO a big button is better. Carlos Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.