techdj Posted June 21, 2006 Share Posted June 21, 2006 Hey all, I am currently working on a Design Project, that requires me to devise a way to install a motor/power system for a stage revolve. I anybody has any ideas or websites that may be useful to me I would greatly appreciate it. Cheers techdj Link to comment Share on other sites More sharing options...
AndyJones Posted June 21, 2006 Share Posted June 21, 2006 Hello Mate, Welcome to the Blueroom! Here are some links that may or may not be of use: Webpage 1Webpage 2Webpage 3 If you are building your own there are going to be health and saftey isssues, which I'm sure the others will tell you about! hope this helps! AndyJones just found some more! Webpage 4Webpage 5 Link to comment Share on other sites More sharing options...
Sarah Q Posted June 21, 2006 Share Posted June 21, 2006 Well, I recommend picking the brains of your technical department lecturers/lecturers.... I am sure they can help (!) Certainly a good idea to ask around here though, sure there are people that have done this type of thing before. I have found these people useful for information in the past: http://www.therevolvingstagecompany.co.uk/ Hope you sort out the problem.... Welcome to Blue Room! Channel38 Link to comment Share on other sites More sharing options...
Fletch Posted July 10, 2006 Share Posted July 10, 2006 Hi, I used to work for these chaps and they do all sorts of stage automation - although you'd have to contact them for specific info. Stage Technologies CheersFletch Link to comment Share on other sites More sharing options...
Stewart Newlands Posted August 16, 2006 Share Posted August 16, 2006 Thought I would mention http://www.stageone.co.uk/ for motion control, although one thing with revolves can be the wire rope splicing to get a loop which they do rather well in eastern europe. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.