SceneMaster Posted January 3, 2006 Share Posted January 3, 2006 Hi, I placed two text labels onto my cad drawing… one I can move rotate and delete and the other I can’t do anything to I can’t even select it even to just delete it. Has this ever happened to anyone else and if so did you find a way to remove the label (or could just be any of the CAD items) without restarting the whole drawing? Thanks, Jon Link to comment Share on other sites More sharing options...
Doug kelly Posted January 3, 2006 Share Posted January 3, 2006 Do you know which layer the label is in as that layer may not be editable? Just an idea Doug Link to comment Share on other sites More sharing options...
strand600X Posted January 3, 2006 Share Posted January 3, 2006 I had the same problem when I placed a lantern on a bar it turned out that it was on a different layerchange layers delete it then place it again onto the same layer as other stuff Link to comment Share on other sites More sharing options...
merlin24 Posted January 4, 2006 Share Posted January 4, 2006 I placed two text labels onto my cad drawing… one I can move rotate and delete and the other I can’t do anything to I can’t even select it even to just delete it...Can you give me any more info. There are a couple of possibilities. Are you using different layers. Have you broken the layers into Scenes. If you cannot give me any info than you have, Send me the drawing and I will take a look at it for you. Send to andy.mahaffey@aclighting.com Kind Regards Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.