musht

One report blaming component in HVAC system, during sound check.

Particularly Black Light Blue, BLB,  tubes as Adam says not tanning , insect or germ killers, because

https://youtu.be/6DlfLthx89E?si=0-g_nkSeaolSWdXw

black paint standard 4 foot fittings, use tubes like

https://www.lampshoponline.com/f36w-blb-4ft-36w-t8-blacklight-blue-tube.html

UV fluorescent, something like

https://www.thomann.de/gb/eurolite_complete_uv_set_120cm_36w_slim_474669.htm

At least 2 avoid shadowing.

LED is expensive for true blacklight, >370nm wavelength.

"out of date"   

"superceeded"

Phrases your reaching for are " vintage " and "rare" 😉

Ebay and FB has couple of groups dedicated to vintage disco gear, it's a niche in itself.

Used to know a guy who did lot of CRT monitor repairs, the low ceiling above his bench was peppered with chopper transistor shrapnel.

Yeggi.com , STL search engine , as usual, case of keyword bingo, lot free, some paid

https://www.cgtrader.com/3d-print-models/miniatures/memorabilia/patt-123-vintage-strand-electric-stage-light

Tinkercad, online designer, more powerful than it first appears, easier than Fusion 360.

SketchUp, be aware of reversed faces, it's a surface modeler not a solid modeller 

If you've ever had an Italian vehicle, would understand why Clay Paky made a selling point of electronics by Pulsar....

These style of Draper's are decent,

https://www.ebay.co.uk/itm/304342583969

Wera if needing them a lot.

A look at Christmas light makers

CAD feeding into CNC,laser cutting, 3D printing have made short runs of items lot more feasible.Don't need to amortise tooling over long runs.

Disagree that batch manufacturing loses opportunity for improvement, it encourages it , as it's a change of gcode and process and the next part is the new design. Not a debate on wether need £30K on a redesign of a tool.

It's not got volume of car or domestic appliance manufacture, it's also especially at moment, a very fast moving market. What was production life of Pat 23,  30 odd years? Those very expensive moulds paid for themselves. Now an LED fixture over 5 years old looks a bit antique.

Here's a look at another end of Chinese manufacturing, flex PCBs, now that's what I call investment

Light Guide Plates

https://hackaday.com/2023/03/13/a-hackers-introduction-to-diy-light-guide-plates/

Plaztazote and Ethafoam , typically LD45, are the big brands in closed cell foam.

FR tinsel apparently rare

East Midlands Designer Outlet, South Normanton, pics from FB, about week ago

Lamp is G4 or GY6.35 base halogen, plug is actually a speaker DIN plug but common on some Low Voltage plug in lighting supplies, for 50W halogen lamp, something like this

https://www.amazon.co.uk/Black-Finish-12V-Low-Voltage/dp/B071WWDLDW/ref=mp_s_a_1_1_sspa?crid=J9SNVBGXPJFI&keywords=plug+in+50W+halogen+transformer&qid=1698935474&sprefix=plug+in+50w+halogen+transformer%2Caps%2C91&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

Need to change connector.

Using LED replacement lamp, much smaller power supply needed like

https://www.amazon.co.uk/Supply-Adapter-100-240V-Transformer-Connector/dp/B09NBTBLH4/ref=mp_s_a_1_9?crid=17UOOMTCBQ13T&keywords=12V+transformer+plug+for+lights&qid=1698935854&sprefix=12v+transformer+plug+for+lights%2Caps%2C109&sr=8-9

Griven make a couple of LED gobo projectors

 https://www.griven.com/en/products-filter/group,image_projectors

Used to make the 150w CDM Goboclip

Individual control or just the whole string?

Individual, www.awesomeledlist.com commercial systems tab

Whole string, decent dimmable golf balls, always had good luck with Philips brand lamps.

Thinking just replacing the V+ supply lines, XT60 2 pole, MT60 3 pole , popular RC connectors easy to find.Anderson Powerpole with 15A contacts , easily solderable, 1 to many poles.

Silicone grease 

http://www.satcure.co.uk/tech/silicone.htm

Is that an unused V+ pad beside connector?

Wiring probably CCA with 18AWG insulation....22AWG conductor.

Replace with copper at decent guage direct to PCB with XT60 connector pair in middle.

Wipe of silicone grease on mating parts of connectors and around seals does help.

Thomann still host a user manual

https://images.thomann.de/pics/prod/105545_installation.pdf&ved=2ahUKEwjW1vu-w4mBAxUZXEEAHbioDiMQFnoECAwQAQ&usg=AOvVaw2VUT4U-9p5auJgjFCfo-zR

Washing Soda is sodium carbonate, Baking Soda is sodium bicarbonate and Caustic Soda is sodium hydroxide.

JST SM , the wings are for panel mounting.

Most common connector for LED strips.

Be aware that they are 2.5 mm pitch, some PCBs standard spacing is 2.54mm (1/10") 2.5 mm pitch headers won't fit in long runs.

www.awesomeledlist.com, connectors tab for some options.

3d Warehouse is still about,

https://3dwarehouse.sketchup.com

SketchUp can have issues with 3d design for printing, inverted faces that create holes. 

Plugins are available for STL export

Yeggi is a 3d file search engine 

https://www.yeggi.com/q/steeldeck/

Tinkercad for easiest steps into your own design 

https://www.tinkercad.com/

Cueserver, totally rock solid, is in same class as Pharos/Mosaic , full featured architectural control.

Anytronics build stuff that lasts.

If not needing to pay for unused features, mebbe something more in DMX recorder class. Thomann have a few, reviews say  this one will play back moving heads , moving 

https://www.thomann.de/gb/stairville_dr1_dmx_recorder_19_sd.htm

Cueserver?

https://interactive-online.com/products/cueserver