3guk Posted September 30, 2005 Share Posted September 30, 2005 Guys I have a few 812s that I would like to update the software on to 3.0 as they are all different batches. some as old as 2.4. Anyone know how to do it or what cable to use ? Link to comment Share on other sites More sharing options...
johnhuson Posted October 1, 2005 Share Posted October 1, 2005 Most of the newer Martin fixtures it is possible to update the firmware using one of there uploader devices such as the MP-2. However the only way that I am aware of updating the 812's is to re-flash the main CPU in the fixture but this requires specialist equipment. You can also buy a replacement CPU pre-programmed for Version 3.0, P/N 62122010 which is available from any friendly Martin supplier ;). Just out of interest what version are you running currently as looking at the CPU log there have only been MINOR tweaks and bug fixes since about version 2.8. Link to comment Share on other sites More sharing options...
3guk Posted October 2, 2005 Author Share Posted October 2, 2005 Two of them are 2.4 and having looked at the logs stuff has been updated quite a bit since then !! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.