3u Rack Box

[3guk]

Thanks paul !! Much appreciated, really is !!

[James]

Thanks paul !! Much appreciated, really is !!

<{POST_SNAPBACK}>

 

Be Careful

 

What Paul Quoted you was just the bottom and the sides of the 3U case only

 

there is no front back or top to that case

 

You need the other codes, as I have quoted them above if you want the top, back, or front.

 

Of course if you only want the bottom and sides then let me know and I will shut up.

 

Good Luck

 

James

[paulears]

james is dead right - re-reading the spec 5 times, I've come to the same conclusion. I read it as the front, rear, tops and handles were extras, as in extra ones. I have to say that if these are required items, then the cost is out of all proportion - as in over £100 inc vat!!

 

I did find this link.

 

link

 

not sure if it is useful or not

[Dave]

Also try Bryant Broadcast - I've used their boxes several times and rather like them. If they don't do a deep enough one for you, they can probably custom make one at reasonable cost.

[James]

Also try Bryant Broadcast - I've used their boxes several times and rather like them. If they don't do a deep enough one for you, they can probably custom make one at reasonable cost.

<{POST_SNAPBACK}>

 

Assuming that 3guk doesn't have a copy of the bryant catalouge to hand, These are the ones Bryant do.

 

http://www.bryant-broadcast.co.uk/c2/uploads/rb1%20100.jpg

 

If you do have a catalouge then I apologise and its on page 147.

 

James