Zero 88 Fat Frog

[Sally]

I can't get faders 25-48 to work on the desk. It was taken apart earlier and now 25 registers as number1. has it got something to do with the dip switchs on the inside of the desk if so wot should they be set to. Any help would be great thank you

[peter]

First off, check that the desk is in Wide Mode - if not, the bottom bank of faders act as a second preset for manually crossfading between scenes. If Wide Mode is enabled, and you're still getting the wrong control, it is possible that the panels were altered when the desk was taken apart - the fader panels are addressed using the DIP switches on the back of them - I can't remember off the top of my head which panel is addressed as which, but logically it would be 1 for the top panel and 2 for the second. Give Keith at Zero88 a call, he'll be able to talk you through this.

[brad!]

To anyone interested in this post... Problem now sorted! The correct dip switch setting inside a frog should be: off off off, for the first lot (1-12 etc) and then off off on (13-24).

 

:) for Zero 88!

[lxkev]

One feature on the frog which is handy, hold f1 when it puts up and it lets you test the faders, wheels etc... (but not on frog 2)