Jump to content

ADJ Mega Hex Par wireless DMX conversion problem


Recommended Posts

Hello from Wigan!


Hi and sorry to jump straight in with a question, over the years I've found this forum very useful and hoped someone can help.


I bought some Mega Hex pars from ADJ and decided to buy the wireless DMX modules from China. I converted all the lights, but one of them has developed a fault where some of the programs don't work.. All the colours work when you select a random program with the IR remote, but if you try to select a colour on its own, nothing happens. The unit does not respond to DMX anymore either. There were 2 resistors burnt out on the LED board, which I replaced as the unit stopped working completely, but this fault still remains. I've got a feeling I took the 5 volt supply for the wireless DMX modules from the wrong place and broke the DMX chip, but I'm not sure. The other lights are working perfectly!


Any help would be much appreciated.


Best wishes


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.