Betapack 2 problem

[Cctheatre]

hi one of the channels on my betapack is staying on continuously - is there anything I can try to fix this? The test button is definitely not pushed inThanks

[DrV]

The most likely cause of a single channel being on permanently is a shorted triac. If you are competent to work on the innards of mains equipment then they're easy enough to replace.

Dave

[Cctheatre]

1545462745[/url]' post='569713']

The most likely cause of a single channel being on permanently is a shorted triac. If you are competent to work on the innards of mains equipment then they're easy enough to replace.

Dave

 

Thanks Dave - I’m a good have a go person so will see what I can do

Best wishes

[DrV]

Ok - usual caveats relating to safety apply. Be sure the the Fast-on connectors are tight and, while you're in there check the tightness of the main bus-bar terminations (where the mains comes in) and check for any scorching or signs of overheating on them and on any of the other Fast-ons.

Dave

[Edward- Z88]

hi one of the channels on my betapack is staying on continuously - is there anything I can try to fix this? The test button is definitely not pushed inThanks

 

Hello,

 

If you have any queries with this just send us an email to support@zero88.com and one of the team will be able to help you out.

 

Edward