TopDingus Posted October 26, 2018 Posted October 26, 2018 Im trying to map dials and faders from a QL1 to a behringer X-Touch Compact, I have the faders set and are bidirectional however I cant find a setting to map the gain/pan or other knobs on the yamaha to a midi device. where in teh settings would I find this? and I ahve contacted yamaha and behringer and both have said it was impossible to get this far. Last bit of config needed is just mapping the knobs via midi to a external fade board. any help would be greatly appriciated.
timmeh2 Posted October 29, 2018 Posted October 29, 2018 Hi Pages 164 to 167 of the reference manual will contain the information you require. You can assign pan functions to a CC message but the desk has not got this set up by default so you will need to add your own parameters to the CC list. All the bestTimmeh
Sound Posted May 30, 2019 Posted May 30, 2019 I am trying to achieve the same: Yamaha QL5 to be control by x touch compact beringer via midi control. Easy to set up faders to be controlled, but can not get other parameters to work via midi. Any advice?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.