robthirlby Posted May 26, 2018 Share Posted May 26, 2018 We would like to extend our tecpro/canford system with one or two mobile stations which just be full duplex. Is there any way of connecting tecpro (MS741) to say the unity IP system? Link to comment Share on other sites More sharing options...
J Pearce Posted May 26, 2018 Share Posted May 26, 2018 Diverting slightly, the Altair kit is quite good for adding wireless to tecpro setups.We have 2 kits of 4 outstations, which reliably connect to whichever venue we’re in, and also work standalone and as a basestation for further wired packs if required. Link to comment Share on other sites More sharing options...
jbrown96 Posted May 29, 2018 Share Posted May 29, 2018 Agree that the altair kit works well with the Tecpro kit. If you get the right Altair base station then they do work and power the Tecpro system. My only note from having used them a fair bit recently is that personally I feel that the belt packs aren't as robust as they other brands and I have experienced a couple becoming a bit temperamental. Link to comment Share on other sites More sharing options...
timsabre Posted May 29, 2018 Share Posted May 29, 2018 I have found the Altair packs to be a bit quiet in the headphones when I've used them - fine for theatre but not so good for music. The level sent onto the wired system was a bit low too, i.e. the wireless users were quieter than the wired users. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.