DJ Kaz Posted October 11, 2017 Share Posted October 11, 2017 Hey guys, new to the group, I'm a mobile wedding entertainer using 8 Martin Mini Mac Profiles as part of my light show. At a recent event, one fixture stopped responding to DMX altogether. when I power cycled the fixture, I can hear the shutter move into it's home position, the lamp strikes, but none of the other servos move. no pan/tilt, nothing :( I know these are an older fixture, but I'm hoping someone can point me in the right direction with troubleshooting. Link to comment Share on other sites More sharing options...
IRW Posted October 11, 2017 Share Posted October 11, 2017 http://www.blue-room.org.uk/public/style_emoticons/default/welcomeani.gifHi Kaz, welcome to the Blue Room! Did it stop working mid-gig, or was it not working from the off? Link to comment Share on other sites More sharing options...
DJ Kaz Posted October 12, 2017 Author Share Posted October 12, 2017 it was working during setup, then unplugged while I went offsite for the ceremony. I got back to the venue, someone plugged them back in, everything else worked except that one fixture. I've checked both fuses on the PCB, they are both good, the servo motors move with some resistance when the fixture is plugged in, but it wont move to "home" position Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.