Louis sullivan NLS Posted May 17, 2016 Share Posted May 17, 2016 Hi All,we have an issue with our fat frog..all the channels are basically on pre heat or very dim until you bring both preset masters to zero or the master fader down.it also does it when we bring a submaster with channel data up. any ideas?thanks in advance Link to comment Share on other sites More sharing options...
kgallen Posted May 18, 2016 Share Posted May 18, 2016 Can you programme a scene with all channel faders at 0 and the preset masters and GM at full and see if the output window shows 00 for the channels or a non-zero number? If they are all 00 then the problem is unlikely to be the FF as 00 is going out in the DMX packets for those channels. You can do the same check with the submasters. Then power the desk up holding F1 to get into test mode and work through the faders checking the result on the LCD.If the numbers are not 00 then maybe a voltage reference for the faders has gone wrong in the desk, however you'd expect this to isolate to a given set of faders not the whole desk. Kevin Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.