Luciano Posted December 8, 2015 Posted December 8, 2015 Goog morningApologize if forum is wrong.On my new mixer TF3 I have reflected the following fault (if it is a fault)I connect a wireless device to the mixer.(with the active sync from mixer to pc)PC is active with a scene different from the one that is located on the mixer.After syncronization the scene that is displayed on the PC is the same as the mixer (all settings are run - fader etc).but the title of the scene on the PC remains the previously stored on the PC with the number of the scene that blinksThis creates confusion because it is not clear on what you're working.Someone can help me?Thank you
mackerr Posted December 8, 2015 Posted December 8, 2015 Goog morningApologize if forum is wrong.On my new mixer TF3 I have reflected the following fault (if it is a fault)I connect a wireless device to the mixer.(with the active sync from mixer to pc)PC is active with a scene different from the one that is located on the mixer.After syncronization the scene that is displayed on the PC is the same as the mixer (all settings are run - fader etc).but the title of the scene on the PC remains the previously stored on the PC with the number of the scene that blinksThis creates confusion because it is not clear on what you're working.Someone can help me?Thank you Does it still show the wrong scene after you have recalled the scene on the console again? Mac
Luciano Posted December 9, 2015 Author Posted December 9, 2015 I didnt try it.Iìll try and I'll inform about it.Thanks Goog morningApologize if forum is wrong.On my new mixer TF3 I have reflected the following fault (if it is a fault)I connect a wireless device to the mixer.(with the active sync from mixer to pc)PC is active with a scene different from the one that is located on the mixer.After syncronization the scene that is displayed on the PC is the same as the mixer (all settings are run - fader etc).but the title of the scene on the PC remains the previously stored on the PC with the number of the scene that blinksThis creates confusion because it is not clear on what you're working.Someone can help me?Thank you Does it still show the wrong scene after you have recalled the scene on the console again? Mac
Luciano Posted December 10, 2015 Author Posted December 10, 2015 Yes it is.If I recall the scene on console nothing change.I must enter in thetitle library on PC and change the scene manually.In this case the number of scene stop to blink.Thank youI didnt try it.Iìll try and I'll inform about it.Thanks Goog morningApologize if forum is wrong.On my new mixer TF3 I have reflected the following fault (if it is a fault)I connect a wireless device to the mixer.(with the active sync from mixer to pc)PC is active with a scene different from the one that is located on the mixer.After syncronization the scene that is displayed on the PC is the same as the mixer (all settings are run - fader etc).but the title of the scene on the PC remains the previously stored on the PC with the number of the scene that blinksThis creates confusion because it is not clear on what you're working.Someone can help me?Thank you Does it still show the wrong scene after you have recalled the scene on the console again? Mac
Recommended Posts
Archived
This topic is now archived and is closed to further replies.