Jump to content

Magnum 2000 smoke machine repair


Recommended Posts

Hi Andy,


You do not have to remove the pump mounts to remove the pump.


If you disconnect the fluid input pipe and also disconnect the brass fitting from the heater you can then manipulate (see man-handle) the pump (inlet/short side first) out of the rubber mounts.


Once the input side is free you can then slide the output (longer) side through the rubber mount.





If you still need to access the screws then you need to remove the hanging bracket and bolts..then the front/rear end plate screws (hex head) and then carefully 'tap' the side panel off...


It is much easier to try the first method...





refitting is simply a reverse 'manipulation'..

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.