stevew Posted April 3, 2015 Share Posted April 3, 2015 Hi this may be nothimg to worry about but I'll ask my powermates right hand led's dont operate until the unit is cranked up. volume and everything seem to be okshould I be worried. Link to comment Share on other sites More sharing options...
KevinE Posted April 4, 2015 Share Posted April 4, 2015 is it a mk1/2/3? I assume you mean the bargraph meters. They work differently in the different versions. In the mk2,3 for example you can arrange for one side to show mixer output and the other to show PFL. On the mk1 you can't. Link to comment Share on other sites More sharing options...
stevew Posted April 4, 2015 Author Share Posted April 4, 2015 Thanks for the reply its a mk2is it a mk1/2/3? I assume you mean the bargraph meters. They work differently in the different versions. In the mk2,3 for example you can arrange for one side to show mixer output and the other to show PFL. On the mk1 you can't. Link to comment Share on other sites More sharing options...
stevew Posted April 9, 2015 Author Share Posted April 9, 2015 I thought I would get a bit more info back on this from those in the know Link to comment Share on other sites More sharing options...
warrenstuart Posted April 9, 2015 Share Posted April 9, 2015 I thought I would get a bit more info back on this from those in the know My guess is you've not had many replies because I think in answer to your original question if it all seems to be working ok other than the R/H LED display and the R/H output isn't low compared with the L/H output then I don't think you have anything to worry about if you can live with the fault. Warren. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.