Jump to content

New member help


cj_sat69

Recommended Posts

Hi guys just joined this forum as I have heard alot about it. I currently have a pair of martin mini macs and a pair of american dj scanners.

 

I have someone selling a pair of GLP YPOC 250's. Do you think I should hold onto the martins or go for the GLP's as the mini macs are in need of a service

 

orrrr shall I just buy a pair of mac 250's?

 

what do you guys think

 

thanks

 

cj

Link to comment
Share on other sites

Im a mobile dj so use them on the road, im also thinking of installing them in my mates bar after they have been serviced. I think ill just hold on tot them. Where is the best place to get parts or them such a fan and the colour gobo wheel as some of the glass has been scratched and started to chip.

Thanks

Link to comment
Share on other sites

If the glass has started to chip INSIDE then they've had a hard enough life I'd not touch them with a barge pole. Never buy knack erred, old, mismatched lights. The damn things are just too unreliable. Much as it pains me to say it, I'd buy some new, three year warranties led kit! I have four identical older 575w discharge fixtures, and three now have small faults, dodgy ballast, pcb, nosy motors etc. the cost for all the needed parts will be a waste because they will still be ten years old, waiting for the next fault.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.