M7CL Ipad control router issues

[SoLiEn]

Hi All,

 

Im having issues with a Belkin router used for ipad access to an M7,

 

Is anyone able to help me out to sort out the settings on the router so the latency is minimal and it runs much more stable?

 

Bit lost with it all to be honest, I assume its a router issue, I can connect it just doesnt last long and doesnt seem helpful compared to other setups?

 

D

[soundiesam]

from the Yamaha website:

 

With iOS6 you may experience Wi-Fi connection difficulties which can result in StageMix repeatedly losing sync with the console. Should you encounter this problem, please use either of the following procedures in order to maintain a stable Wi-Fi connection.

 

[solution 1: If using a static IP address setting on the iPad.]

1. Open "Settings" application on the iPad.

2. Select Wi-Fi.

3. Tap [ >] of Wi-Fi Network you are using.

4. Tap [ Router ] and enter the IP address of the Router or Access Point.

（IP address is usually printed on the bottom of the device.）

5. Tap [ DNS ] and enter the same IP address as used in the above step 4

6. Close "Network Settings"

7. Launch StageMix and connect it to a console.

 

* Please note that the DNS address entered in the above step 5 must be set as required if using your iPad to connect to the Internet via the same WiFi device. Please ask your Network Administrator for assistance.

 

[solution 2: If using the DHCP setting on the iPad.]

Should your Router or Access Point feature a DHCP server, it can be set-up accordingly. If not, use solution 1.

 

( Wi-Fi device settings )

1. Login to your Wi-Fi device using a web browser etc. and enter the set-up page.

2. Enable the DHCP server function in the setting page of step 1.

3. Set the upper and lower limits of the IP addresses the DHCP server can assign.

Ensure your console's IP address is outside this range, or reserve its IP address.

4. Set the Subnet Mask to the same value as the console.

5. Set the Router (Gateway) and DNS address if necessary.

6. Store the changes to apply.

7. Re-boot your Wi-Fi device if necessary.

 

( iPad settings )

8. Open "Settings" application on your iPad.

9. Select Wi-Fi.

10. Tap [ >] of Wi-Fi Network you are using.

11. Select [DHCP] under IP address. The iPad will receive the necessary DHCP data from the Wi-Fi device. Tap [Renew Lease] if it does not.

12. Double check that there is no IP address conflict between the console and iPad

13. Double check the iPad has received correct data for the Router and DNS address.

14. Launch StageMix and connect it to the console.