aziz Posted January 23, 2013 Share Posted January 23, 2013 I have no DMX out from a pearl 2000 on line a ,line b still works so must be a driver problem.So how would I go about getting DMX A back up again Thanks Im ok now ,I swapped over the two DMX drivers and now have A and B back but have yet to try C and D. What was confusing me is that all four leds on the side of the drivers were on .I thought these were supposed to be off to indicate a fault. Link to comment Share on other sites More sharing options...
Adam L F Posted January 23, 2013 Share Posted January 23, 2013 Silly question, but have you made sure that the universes are bound to the ports? Link to comment Share on other sites More sharing options...
aziz Posted January 23, 2013 Author Share Posted January 23, 2013 Yes .everything is patched right.It was fine this morning and I opened it up to tighten up the rolacue and when I was finished doing that I noticed that I had no output on A but B was ok Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.