Owen Radmore Posted June 8, 2012 Share Posted June 8, 2012 Hi One of the fader knobs on our Zero 88 Alpha Pack 2 has come off. Can someone advise us how to get the knob back on thanks. Link to comment Share on other sites More sharing options...
pritch Posted June 8, 2012 Share Posted June 8, 2012 Normally it just pushes back onto the metal bit that's left sticking out where the fader cap used to be. If the metal bit's missing, then you're going to be in replacement component territory; Zero88 should be able to help you out if that's the case. Link to comment Share on other sites More sharing options...
jonhole Posted June 8, 2012 Share Posted June 8, 2012 If the metal fader itself has snapped off, you can purchase a new one from your local Zero 88 dealer. There is a full list of all the faders here:http://www.zero88.com/support/index.php?/Knowledgebase/Article/View/512/0/replacement-faders--sliders The AlphaPack 2 fader is part number 4418000. This will need to be soldered directly onto the board, so if you are not comfortable doing this, is might be easier to give the AlphaPack to your local Zero 88 dealer and ask them to do it :-) Regards, Link to comment Share on other sites More sharing options...
Owen Radmore Posted June 8, 2012 Author Share Posted June 8, 2012 Normally it just pushes back onto the metal bit that's left sticking out where the fader cap used to be. If the metal bit's missing, then you're going to be in replacement component territory; Zero88 should be able to help you out if that's the case. Yes it looks like replacement fader teritory as cap and metal bit together. Link to comment Share on other sites More sharing options...
ianknight Posted June 11, 2012 Share Posted June 11, 2012 *puts his hand in the air* We can do that for you... It's a bugger of a job to do properly because it's a through plated board but it's do-able and takes about 30 minutes, if you can leave the rack with us it saves you hanging around listening to me swear at it :P Google Central Theatre Supplies... Link to comment Share on other sites More sharing options...
Owen Radmore Posted June 11, 2012 Author Share Posted June 11, 2012 *puts his hand in the air* We can do that for you... It's a bugger of a job to do properly because it's a through plated board but it's do-able and takes about 30 minutes, if you can leave the rack with us it saves you hanging around listening to me swear at it :P Google Central Theatre Supplies... I called on Friday and awaiting a call back today.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.